English | Español
 Русский | Deutsch

 Request Information

 Besser Company
 801 Johnson Street
 Alpena, MI 49707 USA
 Phone: 989.354.4111
 e-mail sales@besser.com

Important Information
 Verzeichnis
 Privat
© 2004 Besser Company

 

  


 

SERVICE TIP

Mold Compartment Clearance Dimensions

This service tip is twofold: first to clarify the Mold Dimensions and secondly to give dimensions of Mold Clearances in both inch and metric standards.

Mold Dimensions

All molds are constructed 1/16" short of the full modular length of 15-5/8"; that is molds are constructed with 15-9/16" long cavity, (as compared to a 15-5/8" modular length).

The molds are constructed modular in width, for example; a NEW standard mold is 7-5/8" wide  x 7-5/8" high x 15-9/16" long (190mm x 190mm x 390mm).

The 15-9/16" dimension is within the accepted tolerance, to give longer mold life. After the initial wear, the mold is the full modular length of 15-5/8" long.


Mold Clearances

All molds including slabs, solids, low height and specials have the clearances as shown in drawing and listed below.
   

Inch

Metric

A.

 Clearance between stripper shoe and end core liner is

1/16"

(1.5 mm)

B.

 Clearance between stripper shoe and end core is

1/16"

(1.5 mm)

C.

 Clearance between stripper shoe and outside division plate is

1/32"

(.75 mm)

D.

 Clearance between stripper shoe and plain end liner is

1/16"

(1.5 mm)

E.

 Clearance between stripper shoe and core bar is

1/16"

(1.5 mm)*

F.

 Clearance between stripper shoe and inside division plate is

1/32"

(.75 mm)

G.

 Clearance between stripper shoe and cores is

1/16"

(1.5 mm)
*This dimension is 2 mm in pure metric molds even though the conversion is 1.5 mm.