Grinder and Cutter System

Enhance your product line with the Besser Concrete Products Grinder and Cutter System. This versatile system allows you the flexibility to manufacture specialty products such as ground face and scored units in a variety of shapes and sizes. 

Wet product grinding is accomplished by a diamond grinding head driven by a 15 hp motor. An adjustable head allows the flexibility to grind product with heights ranging from 1" (25 mm) to 18" (450 mm). The water spray system suppresses dust, rinses the ground face of the product and floods the heads to prevent material build up. The system is completely automatic.

Brochure (Requires Acrobat Reader)

Standard Features

• Dual head  
• Replaceable and recoatable diamond drums
• Saw Head
• 16" (400 mm) wide infeed
• Decuber
• Universal Arbor
• Slat Conveyor
  
  

Options

• Secondary finishing head with 15 hp motor, arbor and fine grit diamond drum
  
  
• Scoring head with 15 hp motor, arbor, shaft, blade spacers and 4 blades
  
  
• Frequency driver on slat conveyor
  
  
• Diamond saw blades with a 6" (150 mm), 14" (350 mm) or 20" (500 mm) diameter
  
  
• Motorized height adjustment
  
  
• Heads for 24" (600 mm) wide product with 20 hp motor
  
  
• Modular design allows for single or dual head operation
  
  
• A third station station is available

Recommended depth of cut:

Sawing: 3/8" (10 mm) with 6" (150 mm) diameter blade - up to 4 blades to create a scored product

Sawing: 7-5/8" (190 mm) with 20" (500 mm) diameter blade - single blade to cut product almost in half

Sawing: 4" (90 mm) with 14" (350 mm) diameter blade - up to 2 blades to create a knockout bond beam

Water Requirements: 5 gpm at 1000 psi

Speed: Up to 720 units/hour depending on depth of cut