Turntable / Patternmaker

Automatic patternmakers turn concrete units to make interlocking or other tied patterns faster than an operator can and with programmed repeatability. The latest operator graphic interfaces make it easier than ever to program cube patterns and handle special patterning requirements. The best type of patternmaker for a specific application depends upon the production rate and the cube patterning requirements.

Double Turntable Patternmaker Standard Features 

• Accumulating infeed conveyor, 4' 11" (1499 mm) OAL with drive
  
  
• Powered reversing infeed conveyor with block clamps meters block onto shift plate
  
  
• Shift plate for positive separation of block for bar feed
  
  
• Primary turntable with ejector fingers for forming tie patterns
  
  
• Secondary turntable for rotating tied block into correct orientation for cube pattern
  
  
• Bar conveyor
  
  
• Microprocessor controls with memory for up to 99 patterns

Triple and Quad Patternmaker Standard Features 

• Accumulating infeed conveyor, 4' 11" (1499 mm) OAL with drive
  
  
• Powered reversing infeed conveyor with block clamps meters block into shift plate
  
  
• Shift plate for positive separation of block for bar feed
  
  
• Rear bar feed
  
  
• Microprocessor controls with memory for up to 99 patterns
  
  
• Three turntables for handling cubes up to 54" (1372 mm) - Triple Turntable Patternmaker
  
  
• Four turntables for handling cubes up to 64" (1626 mm) - Quad Turntable Patternmaker

Cycle Time: 3.5 seconds per step

Maximum Product Width: 24" (610 mm)

Elevation: 29" minimum - 42" maximum (737 mm - 1067 mm)

Hydraulic Power Unit: 750 psi

Drive Speed (Bar Conveyor): 40 fpm maximum

Hydraulic Oil Consumption: 28 gpm (Peak)

Shipping Weight: 1600 lbs (720 kg) - Triple, 2000 lbs (900 kg) - Quad

 

Technical Service Bulletins