|
|||||||||||||
English |
Español Besser Company |
|
ASG Führer ASG Guides |
| Contacts for Technical Service |
|
Maschinen
Handbücher Equipment Manuals |
| Wie... / How To |
|
Gebrauchsverlängerung von Formen Mold Life Enhancements |
| Preventive Maintenance |
|
Fragen & Antworten Questions & Answers |
| Sicherheit / Safety |
| Software Demos |
| Technical Service Bulletins |
| Technical Service Tips |
| Troubleshooting |
|
Werkstätte für
Betonstein Hersteller Blockmakers Workshops |
|
Schule für Betonrohr
Hersteller Concrete Pipe School |
| Vereinigungen / Associations |
|
Offene Stellen Career Opportunities |
| Concrete Impressions Magazine |
| Contact Us |
| Geschichte / History |
| Nachrichten / News Room |
| Bedingungen / Terms |
| Manufacturing Locations |
| Distributions Centers |
| Career Opportunities |
| Parts |
| Sales |
| Technical Service |
| Request Information |
|
Block Interlock Station* The Block Interlock Station is a pre-patterning device located between the depalleter and cuber. The Block Interlock uses powered rollers to position three standard block, then lifts the last two block up off the conveyor rollers and rotates the block 90 degrees. The block are then lowered back on to the conveyor rollers and discharged. This device saves time at the patternmaker. The patternmaker receives block three at a time instead of one or two block at a time and does not have to make the already completed tie pattern. It is recommended that 20' (6096 mm) of lineshaft conveyor upstream and downstream of the Block Interlock.
Cycle time: up to 8 cycles per minute. Maximum product width: 16" (406 mm) Elevation: 33" to 45" (838 to 1143 mm) Hydraulic requirement: 4 GPM (peak) at 750 PSI Shipping weight: 1200 lbs *The product described herein is covered by United States Patent 5,788,460 for the Block Interlock and "Patent Pending" for the S600. |